Hole-Free Pull Rope Door Closer, Quiet Auto Return
Pull the rope once and the door closes quietly on its own. Mount it with 3M VHB adhesive and leave the wall untouched, or use the screw holes if you own the place.
Read the full descriptionDescription
Pull the rope once and the door closes quietly on its own. Mount it with 3M VHB adhesive and leave the wall untouched, or use the screw holes if you own the place.
Hole-free automatic door closer: pull the rope, and the door closes quietly by itself
- doors slamming shut
- drilling holes in rentals or walls
- doors left open unintentionally
- noisy door closing
Pull the rope. Your door closes quietly by itself.
Tired of doors slamming and waking the house? Mount this hole-free closer with 3M adhesive, then pull the cable once and the door shuts softly on its own.
One pull, and the door closes itself
- A cable that closes the door
The stainless steel cable retracts into the housing and pulls the door shut after one tug. The unit carries a 500 tension rating, printed on the pack.
- Mounts with no holes
A 3M VHB adhesive pad holds the square housing to the wall. Own the wall? Use the four corner holes and screws instead.
- Small, matte and discreet
A matte black square housing and a thin steel cable. It sits beside the frame and does not look like hardware.
The number on the pack
- 500tension rating
- 3items included
- 4corner screw holes
Mounted in minutes, no drill required
- 1Clean the wall
Wipe the spot beside the door until dust-free and let it dry.
- 2Apply the 3M pad
Peel the backing, press the pad to the housing, then press the housing to the wall for the full time on the pack.
- 3Wait for the bond
Let the adhesive set before the first full pull.
- 4Attach the cable
Run the stainless cable to the door edge and test one pull.
- 5Or use screws
On a wall you own, fix the housing through the four corner holes.
Everything you need to mount it
- Black door closer unit×1
With stainless steel cable
- Transparent adhesive pad×1
Hole-free mounting
- 3M adhesive pad×1
VHB backing
From slammed doors to quiet nights
The slam that wakes the house
It is 2 a.m. The door swings, hits the frame, and everyone is awake. Wedges leave it half open, rubber bumpers only dull the end of the swing, and a drill-in closer is off the table when the lease says no holes.
A fix that does not touch the wall
The square housing sticks to the wall with a 3M VHB adhesive pad. A stainless steel cable runs to the door. If you own the wall, the four corner holes take screws instead.
Quiet nights, clean walls
The door closes gently every time, with no push from you. At move-out there is no hole to patch and nothing to explain.
Hole-free beats drilling for renters
| This closer | Drill-in closer | Door stopper | |
|---|---|---|---|
| No drilling needed | Yes | No | Yes |
| Closes the door itself | Yes | Yes | No |
| Tools required | No | Yes | No |
| Leaves wall holes | No | Yes | No |
| Screw option | Yes | Yes | No |
Characteristics
Reviews
Questions and answers
Adhesive can pull paint on poorly cured or cheap paint. Mount on clean, dry, well-bonded paint, and warm the pad gently when removing it. If you want zero risk, use the screw option on a wall you own.
It is rated 500 tension and suits bedroom, bathroom and sliding doors. Very heavy solid doors may need a little help to latch fully, so check the weight first.
Adhesive uses the included 3M pad and leaves no holes. The punch mount uses screws through the four corner holes for a more permanent fix.
Yes. Keep the mounting surface clean and dry, and re-check the adhesive monthly in humid rooms.
Drill-in closers need tools and holes. This one mounts with adhesive in minutes, so it suits renters. Over a few years it costs far less than patching walls or losing a deposit.
Similar products
See all
Hole-Free Pull Rope Door Closer, Quiet Auto Return