Galvanized Hardware Cloth Roll, 1/4 Inch Predator-Proof
A sealed run you can build once and trust. This 36 in x 100 ft roll of 1/4 inch hot-dip galvanized welded hardware cloth blocks small predators and cuts with standard pliers.
Read the full descriptionDescription
A sealed run you can build once and trust. This 36 in x 100 ft roll of 1/4 inch hot-dip galvanized welded hardware cloth blocks small predators and cuts with standard pliers.
Heavy-duty galvanized hardware cloth that keeps small animals in and predators out
- keeping chickens and rabbits contained
- keeping out small predators
- need for durable, rust-resistant fencing
Keep your flock in and predators out
Stop patching rusted wire and losing birds to gaps. A single galvanized roll seals coops, runs and hutches so you can stop worrying about the next breach.
Welded, galvanized and built to last

Small enough to stop predators
The 1/4 inch square openings are tighter than chicken wire, so rats, weasels and snakes that pass through larger mesh have nowhere to go.

Coated to resist rust
Hot-dip galvanizing coats the 23 gauge wire in zinc, so the barrier keeps its strength through rain, mud and seasons outdoors.

One roll, cut to fit
A 100 ft continuous roll covers several coops, runs and hutches with fewer seams. Cut it with standard pliers or tin snips and fasten it to the frame.
The spec, plainly
- 23 gaugeWire thickness
- 1/4 inchMesh opening
- 100 ftContinuous roll length
- 36 inRoll width
Cut, fasten and seal in one afternoon
- 1Measure the perimeter
Measure walls, vents, windows and the ground line. Plan seams so each overlap is a few inches.
- 2Cut to size
Cut with pliers or tin snips. Wear gloves, since cut ends are sharp.
- 3Fasten at every contact point
Use closely spaced staples or ties along the frame and seams. One staple per crossing loosens over time.
- 4Secure the bottom edge
Bury or anchor the bottom edge into the ground or a footer, then fix it to the frame.
- 5Fold the cut ends
Fold or cap exposed edges so birds, rabbits and hands stay safe.
From daily gap checks to a sealed run

The gap you keep finding
Every morning starts the same way. You walk the run looking for a chewed corner, a rusted patch, a bird that is not there. Chicken wire is light, tears easily and rusts within seasons. Rats, weasels and snakes find the gaps first, and they work at night.
Sealed once, done
A 36 inch by 100 ft roll of 1/4 inch hardware cloth covers the coop, the run and the hutches in one continuous piece. The grid is welded, the wire is 23 gauge and the finish is hot-dip galvanized. Fasten it properly and you stop checking every morning.
Keep the barrier tight
- Walk the perimeter
Check after rain and wind for loose fasteners.
- Re-tighten staples
Close any new gaps before they become entry points.
- Wear gloves
Cut edges are sharp when fitting or repairing.
- Check the ground line
Predators dig where the bottom edge is loose.
Hardware cloth vs chicken wire
| Hardware cloth | Chicken wire | Thin uncoated mesh | |
|---|---|---|---|
| Blocks small predators | Yes | No | Partial |
| Welded grid | Yes | No | Partial |
| Galvanized coating | Hot-dip | Partial | No |
| Holds up to tearing | Yes | No | Partial |
| Cuts with standard tools | Yes | Yes | Yes |
Characteristics
Reviews
Questions and answers
Yes. The 1/4 inch square openings are far smaller than chicken wire holes, which small predators slip through. Predators that dig also need the bottom edge buried or anchored to a footer.
Yes. It cuts by hand with standard tools. The 23 gauge wire resists firmly, so use sharp snips and gloves, and fold or cap cut ends.
Chicken wire is light, tears easily and rusts. Hardware cloth has a welded grid, tighter openings and a hot-dip galvanized coating, so it holds shape and blocks small predators.
Thinner or uncoated wire rusts within seasons and fails at the seams. Spread over years of use, one roll that you fasten once costs less than repeated patching and lost birds.
Measure the perimeter and height you want to cover. The roll is 36 in wide and 100 ft long, so multiply length by the number of 36 in rows. Allow a few inches for overlaps at seams.














