Decontamination Cleaning Spray for Stains, Oil & Mold
One compact spray that finally dissolves the grease, rust, and mold you’ve scrubbed at for years.
Read the full descriptionDescription
One compact spray that finally dissolves the grease, rust, and mold you’ve scrubbed at for years.
Fast-acting, powerful stain removal across kitchen, bathroom, and household surfaces
- stubborn oil and grease stains
- rust spots
- mold and mildew on tile and grout
- dirt accumulation on washers and toilets
Watch Stubborn Stains Vanish in Seconds
The grease ring, the grout mold, the rust spot you've scrubbed for years — gone with one spray and a wipe. No elbow grease, no five different bottles.
One Spray, Three Stubborn Stains

Cuts Through Baked-On Grease
The fast-acting formula breaks down oil and grease on stovetops, range hoods, and counters so it wipes away instead of smearing. You spray, you wait a minute, then you lift the stain with a damp cloth — no elbow grease needed.

Lifts Stubborn Mold & Mildew
Penetrates grout and tile to clear black mold and mildew, restoring white surfaces without endless scrubbing. The gentle formula powers through organic growth while being safe on sealed surfaces.
Spray, Wait, Wipe
The ready-to-use trigger lets the formula do the work — spray, give it a moment, and wipe the stain away. The fine mist covers evenly, clings to vertical surfaces, and breaks down the bond between dirt and surface so you can literally wipe the stain off.
What You Get in One Compact Bottle
- 120mlready-to-use bottle
- ~240 daysat daily spot use
- 3-in-1oil, rust, mold
Spray, Wait, Wipe Away
- 1Spray the stain
Hold the bottle 6 inches from the surface and spray an even coat directly onto the grease, rust, or mold. The fine mist clings and starts working on contact.
- 2Let it dwell
Give the formula 30–60 seconds to break down the stain. For deep-set oil or old rust, wait a full minute. You’ll see the stain start to lift as the active ingredients penetrate.
- 3Wipe and rinse
Take a damp cloth or sponge and wipe the area. The stain transfers onto the cloth. Rinse the surface with water if it’s a food-contact area, and you’re done.
Everything You Need to Start Cleaning
- Spray bottle with red trigger×1
Pre-assembled, ready to use
- Decontamination cleaning liquid×120ml
Sealed inside the bottle
From Scrubbing to Spraying
- 1The Stain You've Given Up On
You see it every time you walk in the kitchen. That dark ring of grease behind the stove. The coffee-brown mold creeping into the shower grout. The rust stain on the sink that's been there since you moved in. You've scrubbed it. You've thrown five different sprays at it. It's still there, laughing at you. And you've started telling guests, "Ignore that, we're going to repaint eventually."
- 2A Cabinet That Doesn't Work
Your under-sink cabinet tells the story. A half-empty grease remover that smells like a chemical factory and barely cuts the film. A mold spray that needs you to scrub until your arm aches. A rust treatment that claims 'professional strength' but leaves a faint orange shadow. You bought each one full of hope, and now they sit there, a monument to stains that outlasted them.
- 3One Bottle, One Spray
The JAYSUING decontamination spray is different because it doesn't pick a fight it can't win. Its fast-acting formula is engineered to break down oil, rust, and mold on contact. No separate bottles for the kitchen, the bathroom, and the laundry room. One compact 120ml spray that you point at whichever stain has been winning, and for the first time, you watch it lose.
- 4Clean You Can See
When the moldy grout turns back to white and the grease stain lifts in one wipe, it's almost surreal. That surface you'd mentally written off as permanently stained suddenly looks like the day it was installed. And the best part? You didn't scrub. You just sprayed, waited a minute, and wiped. Then you walked away and did something else with your time.
Replace Five Bottles With One
| This Spray | Single-Purpose Cleaners | |
|---|---|---|
| Grease & oil | — | |
| Rust & metal marks | — | |
| Mold & mildew | — | |
| Requires scrubbing | No | Often |
| Bottles under sink | 1 | Up to 5 |
Characteristics
Reviews
Questions and answers
Yes. The formula is designed to break down polymerised grease and oxidised rust on contact. For very old, thick layers, you may need to spray, wait a full minute, and wipe — then repeat once. But most everyday grease and rust lifts in a single pass.
The gentle formula is safe for sealed surfaces including ceramic tile, porcelain, stainless steel, sealed stone, and most bathroom and kitchen finishes. Always test a hidden spot first, especially on older or unsealed grout.
Yes, with common-sense precautions. Keep the spray out of reach of children, ventilate the area during use, and rinse food-contact surfaces with water after treatment. The trigger spray is ready-to-use — no mixing, no fumes comparable to bleach.
Most households find a bottle lasts about 8 months with daily spot use. If you use it for a whole-kitchen clean weekly, you may go through it faster; but because you spray only where needed, a little goes a long way.
No. The spray is designed to break the bond between stain and surface so you can wipe it away with a damp cloth or sponge. In our tests, over 90% of common kitchen and bathroom stains lifted without any scrubbing.
Yes. Coat the moldy grout line evenly, let the spray dwell for a minute, then wipe and rinse. You'll see the black colour transfer onto your cloth and the grout return to its original light shade. For deep-set mold, you may need two applications.
Similar products
See all






