CPAP Mask Ozone Sterilizer: No-Consumable Cleaning

One button, a clear timer, nothing else to manage

• One button, no guesswork

  A single power button starts the cycle. The LED timer shows 20 or 30 minutes on the mirror-glass front, so you always know how much time is left before the gear is ready.

• Built for nightly routines

  There are no cartridges, tablets or cleaning solution to restock. The only running cost is power for the rechargeable lithium-ion battery, charged through the micro-USB port.

• Compact enough to travel

  At 0.5 lb, the unit fits a nightstand or a carry-on. Pack it with the charging cable and run a cycle in your hotel room before you check out.

Two cycles, one button, half a pound

• 20 / 30 minSelectable cleaning cycles
• 0.5 lbLightweight and portable
• 1 buttonOne-button start, no setup menus

From dirty mask to ready in three steps

1. 1
   Rinse and air-dry the gear

   Rinse the mask and hose with plain water, shake off the excess, and let the parts air-dry. Standing water and soap residue can block contact with the surfaces.

2. 2
   Place the parts in the unit

   Take the mask off your face, set the cushion and hose in the unit, then step away from the device. Never run a cycle with the mask on.

3. 3
   Pick a cycle and press the button

   Choose 20 or 30 minutes, press the power button, and watch the LED timer count down on the mirror-glass panel. Let it finish before you touch the gear.

Every morning, the same damp question

The morning mask

You pull the mask off, feel the damp cushion and the warm hose, and wonder what has been growing in there all night. Most mornings you rinse it, hang it up and move on. The smell comes back a few days later.

Why washing falls short

Soap and a brush reach the outside of the cushion and the front of the hose. The inside of the tubing and the seams in the cushion stay out of reach. That is where moisture collects, so the buildup returns no matter how carefully you wash.

One press, twenty minutes

Set the parts aside, choose the 20 or 30 minute cycle, and press the power button. The LED timer counts down on the mirror-glass panel while ozone works through the gear. When the timer hits zero, your mask is ready for the night.

Skip the restocking that wipes and tablets demand