Cordless Brushless Blower Gun for Dust and Drying Jobs
Dust settles in vents, tool bodies and keyboards faster than rags can chase it. This cordless brushless blower moves it out with up to 40 m/s of airflow and five nozzles, and it runs on the 18V-style battery you already own.
Read the full descriptionDescription
Dust settles in vents, tool bodies and keyboards faster than rags can chase it. This cordless brushless blower moves it out with up to 40 m/s of airflow and five nozzles, and it runs on the 18V-style battery you already own.
Cordless brushless turbo blower with up to 40 m/s airflow for fast cleaning and drying
- Dust and debris on workbenches and machines
- Blowing out electronics, keyboards and vents without compressed air
- Drying wet surfaces or parts
- Hard-to-reach cleaning with interchangeable nozzles
Clear the dust without the compressor
Dust settles in vents, tool bodies and keyboards faster than rags can chase it. This cordless brushless blower clears it with up to 40 m/s airflow and five nozzles.
Brushless turbo airflow that clears what rags miss

Turbo airflow on demand
The brushless DC motor is rated to 96000 RPM and delivers up to 40 m/s of airflow. The jet lifts fine grit out of seams and vent slots, the job a rag only pushes around.

Five nozzles, one trigger
The angled main nozzle comes installed, and four tapered tips sit in the box. Use the angled head for bench edges and the narrow tips for keyboard gaps, vents and seams.

Runs on your 18V battery
A tool-style battery adapter base takes the 18V-style packs most shops already own, Makita and DeWalt among them. Seat your pack fully before the first trigger pull.
Ratings at a glance
- 96000 RPMBrushless motor maximum speed
- 40 m/sMaximum airflow
- 5 headsNozzles in the kit, one installed
Get the first run right
- 1Seat the battery
Slide your 18V-style pack into the adapter base on the body until it clicks fully home.
- 2Pick the nozzle
Start with the angled main nozzle for bench work. Swap to a tapered tip for vents and keyboard gaps.
- 3Pull and sweep
Squeeze the trigger and sweep from one side of the surface to the other, blowing debris away from the tool.
Five nozzles for every gap in the shop
- Blower body×1
Pistol grip, trigger switch and battery adapter base
- Angled main nozzle×1
Installed on the body for bench work
- Tapered blowing nozzles×4
Quick-fit tips for vents, seams and keyboard gaps
Dust comes back tomorrow

The dust is back again
Sanding finishes and cut chips settle on the bench by lunchtime. A rag pushes the grit around and leaves a film in the grooves. Canned air clears one spot, then the can runs dry and the next one costs money you did not plan to spend.
A tool built for your battery
The adapter base takes the 18V-style pack you already charge for your drill. Add a brushless motor and five nozzles and you have a battery powered blower for the bench, the PC and the car. No hose, no cord, and no compressor cycling in the corner.
What to expect over your first weeks
- First useCharge and attach the adapter
Confirm your battery fits the adapter base before first use. Start with the angled main nozzle on a light dust job to learn the airflow.
- 3 usesNozzle choice becomes routine
You will know which tapered nozzle reaches vents, grooves and keyboard gaps. Most cleaning drops to a quick pass.
- 30 daysPart of the weekly routine
The blower becomes the default for bench and PC dusting. Check the body and nozzles for wear and keep vents clear of debris.
Versus canned air and a small compressor
| This blower | Canned air | Small compressor | |
|---|---|---|---|
| Cord needed | No | No | Yes |
| Uses a battery you already own | Yes | No | No |
| Tapered tips for tight gaps | Yes | Partial | No |
| Needs a hose | No | No | Yes |
| Runs out and needs a refill | No | Yes | No |
Characteristics
Reviews
Questions and answers
The battery is not in the box. The body takes a tool-style battery adapter base, and 18V-style packs from Makita and DeWalt are the intended fit. Seat the pack fully before the first trigger pull and you are ready to go.
The body is plastic with a rubberised black grip that stays secure with dusty hands. Keep the intake clear, blow debris away from the motor vents, and check the nozzle tips for cracks now and then.
Canned air gives you one short blast and then you buy another can. This blower runs on a battery you already charge, so each clean costs you nothing extra. The tapered tips also reach vent slots and keyboard gaps that a spray misses.
A small compressor needs a hose, a cord and a loud cycle every time it fills. This blower skips all three. For weekly bench and PC dusting, you get the use of a battery you already own and skip the compressor line.
Use a tapered nozzle for vents, keyboard gaps and seams, and keep the angled main nozzle for bench edges and chips. Match the tip to the gap. If it does not seat easily, try the next size rather than forcing it.
Similar products
See all





