Cellular Trail Camera 12MP with MMS & Email Alerts

Everything you need, delivered to your phone

Photos arrive without the hike

GPRS and MMS push each captured image to your phone, laptop or inbox. The SIM slot and TF card slot sit together on one side panel, so setup is a single session at the tree. Once it is running, the camera does the scouting and you read the results at home.

Clear frames, day or dark

The lens pairs 12MP stills with 1080P video, and a 1.1s trigger catches movement fast. The PIR/FIR sensor covers a 60 degree detection angle, and infrared LEDs take over when the light drops. The light sensor and laser aiming help you line up the shot before you lock the housing.

Locked down, left in place

The housing has a metal latch and a security cable lock, so the camera stays where you tied it. The external battery compartment comes with a strap, which keeps the pack on the tree and out of the mud. A camo finish helps it disappear on a fence line or a feeder edge.

Specs that matter in the field

• 12MPStill image resolution
• 1.1sTrigger speed
• 60°Detection angle
• 3000Photos on battery capacity

Running it from the first SIM insert

1. 1
   Insert the SIM and memory card

   Open the side panel and seat the SIM in its slot, then add the TF card. The panel has the USB, TV out and power switch in one place, so you only open it once.

2. 2
   Set the MMS or email destination

   Enter the phone number or inbox that should receive photos. Use the remote control or an SMS command to save the destination, then send a test trigger.

3. 3
   Attach the antenna and mount

   Connect the external GSM antenna firmly and route the cable away from pinch points. Strap the battery compartment to the tree and lock the housing with the security cable.

4. 4
   Confirm signal at the mount

   Trigger the camera once and wait for the test image. If it does not arrive, shift the mount height or angle a little and try again before you leave the site.

What arrives at your door

• Trail camera×1

  Camo plastic housing with lens, IR LEDs and 2.0-inch TFT screen

• External GSM antenna×1

  Attaches to the housing for cellular delivery

• Remote control×1

  Handheld control for settings in the field

• Battery compartment with strap×1

  External battery holder with strap for mounting

The hike that ends here

The wasted hike

You drive out, walk the ridge, unlatch the housing and pull a card. Half the time the frames show wind moving brush and nothing with a pulse. Every empty check costs an afternoon and spooks the game you were hoping to see.

Photos that come to you

The HC300M sends captured images by MMS, SMS or email over GPRS. The photo shows up on your phone while the deer is still on the trail. You can text the camera from the truck and check settings without a laptop or a second trip.

Set it, confirm it, trust it

Setup takes one evening. Insert the SIM and memory card, point the MMS or email destination at your own phone, and check the signal at the mount height before you leave. Once the first photo lands, you stop second-guessing the spot.

What to expect from first setup to season

1. First use
   SIM and destination configured

   Insert the SIM, load your MMS or email destination, and confirm signal at the mount point before you leave the site. The test image shows whether the spot connects.

2. Week 1
   First photos arriving remotely

   Captured images reach your phone or inbox as the camera triggers. If deliveries lag, reposition the antenna and check the spot again.

3. Day 30
   Steady remote monitoring

   Patterns in movement start to show without a single field check. Adjust trigger settings to cut out wind and noise from the trail.

Cellular delivery vs. a card you fetch