Cat Adhesive Wall Hook for Clothes, Hats and Bags
Clear the chair, keep the wall. This cat-shaped hook sticks to painted walls with no nails or tools, so coats, bags and hats finally have a place by the door. The matte finish and smiling cat fit a rental, a dorm or a kids' room without a single hole.
Read the full descriptionDescription
Clear the chair, keep the wall. This cat-shaped hook sticks to painted walls with no nails or tools, so coats, bags and hats finally have a place by the door. The matte finish and smiling cat fit a rental, a dorm or a kids' room without a single hole.
Cute cat wall hook that mounts without nails for clothes, shoes, hats and more
- no drilling or nails needed for wall hanging
- messy entryway or bedroom clutter
- bare walls needing functional storage
- rental-friendly wall damage concerns
A cat that catches your coat, no nails needed
Stop tossing jackets over chairs. Peel, press and hang your bag, hat or scarf on a wall that finally works for you.
Built to hold your everyday hangers
- Holds the everyday load
The curved white arm takes jackets, hats, scarves and tote bags without sagging. It sits flat against the cube when you are not using it, so the hook looks like a decoration until you need it.
- Sticks without a nail
The adhesive backing goes on the wall with no drilling, no screws and no tools. Press it on a clean, dry, smooth surface and hold for about 30 seconds. Nothing gets punched through the paint, which is the whole reason renters reach for it.
- A little cat for the wall
The cartoon cat peeking out of the cube and the smiley HOOK logo give plain walls some personality. The matte plastic finish is clean and even, and the lime, cherry red and sky blue colourways are easy to match to the rest of the room.
Mount it in four steps
- 1Clean the wall
Wipe the spot with rubbing alcohol and let it dry fully. Dust and grease are the main reasons adhesive hooks fail.
- 2Peel the backing
Pull the adhesive backing off the back of the cube. Keep your fingers off the sticky side so it stays clean.
- 3Press and hold
Set the hook on the wall and press firmly for about 30 seconds, working from the center out to the edges.
- 4Wait, then hang
Give the bond a few hours before you load it. Start with a light jacket or tote, then add heavier pieces once it feels settled.
Stick it, lift it, move it on
- Wipe the wall first
Rubbing alcohol on a dry cloth lifts dust and oil before you mount.
- Dust the cat
A soft dry cloth keeps the matte finish and the figurine detail clean.
- Lift slowly
Pull at a shallow angle, or warm the adhesive with a hairdryer before removing.
- Reposition as needed
Clean the wall again and press it on fresh for a new spot.
Characteristics
Reviews
Questions and answers
It is built for everyday items: jackets, hats, scarves, tote bags and backpacks. For a bulky winter coat, mount it on a smooth wall, wait a few hours for the bond to set, and hang the lighter pieces first. A heavy coat on a fresh mount is the one way to ask too much of it.
Take it off slowly. Pull the hook down and away from the wall at a shallow angle, and warm the adhesive with a hairdryer if it resists. Quick yanks are what tear paint, so slow removal is the single step that protects your deposit.
Yes, for school bags, hats and light jackets. Mount it at a child's height on a smooth wall and keep heavier loads on a higher hook. Check the bond every week or so, the same way you would check any hook a child uses daily.
It works best on smooth, painted drywall. Textured walls, dusty surfaces and peeling paint give the adhesive less to grip, so the hook can slip under load. If your wall is rough, pick a flatter spot before you commit.
A drilled hook costs you the deposit conversation with your landlord. Over-door racks take up the space you were trying to free and sag under a full load. One cat hook costs less than a single replacement wall patch, comes off cleanly, and can move with you to the next place.