Car LED Strip Lights — Music-Sync Interior RGB, App +

Three Powers, One Kit

App & Remote Dual Control

Choose from a full 16‑million‑color palette using the clean mobile app, or skip straight to presets with the IR remote. Music‑sync, voice‑react, and timer modes are all a tap away. No dashboard‑clutter—just your phone in its mount.

Music That You Can See

Built‑in microphone listens to your music and pulses the light in real time. Deep bass triggers deep red, treble ripples through bright cyan. It turns any playlist into a personal light show—whether you’re cruising to lo‑fi or hosting a parking‑lot pre‑game.

Modular, No‑Wire Design

Six acrylic strips (140cm, 75cm, and 35cm), four corner connectors and industrial‑grade adhesive tape—all plug‑and‑play. Daisy‑chain what you need, skip what you don’t. USB‑powered straight from the car. Residue‑free removal when you change cars.

The Specs Behind the Show

• 16Mcustomisable shades
• 10pcsmodular strips & connectors
• 2waysApp + IR remote
• <1msmusic‑sync latency

From Unboxing to Glowing

1. 1
   Plan Your Layout

   Lay the strips on the dashboard, door trims and footwells before sticking. The 140cm strip works best along the dash; 75cm strips fit under seats or on door panels; the 35cm strip tucks into the centre console.

2. 2
   Clean the Surface

   Wipe each area with a dry cloth or an alcohol pad (not included). The adhesive needs a dust‑free, dry surface for a strong hold.

3. 3
   Peel and Stick

   Remove the backing from the double‑sided tape and press each strip firmly into place. Use the orange tool to rub along the tube for full adhesion.

4. 4
   Connect the Corners

   Snap the corner connectors onto the ends of strips where you need a 90° bend. These also carry the signal between tubes.

5. 5
   Plug in the Hub

   Connect the USB cable to the control hub and then to your car’s USB port (or a 12V‑to‑USB adapter). The lights will flash once, signalling they’re live.

6. 6
   Download the App

   Scan the QR code on the instruction leaflet or search ‘Smart Life’ (or the supplier’s app) in your app store. Pair via Bluetooth—the app auto‑detects the hub.

Everything You Need

• Main LED strip×1 × 140cm

  Primary ambient tube

• Secondary LED strips×4 × 75cm

  For doors, console or footwells

• Accent LED strip×1 × 35cm

  For small accents

• Control hub×1

  USB‑powered, app‑enable, microphone

• IR remote×1

  24 colour/speed keys, battery included

• Corner connectors×4

  Right‑angle adapters with cable

• Adhesive tape×1 roll

  Pre‑cut strips for each tube

• Orange tool×1

  For tucking wires and pressing adhesive

From Dull to Immersive in One Evening

The Problem: A Car That Just Gets You There

Your car’s factory lighting is functional but forgettable. Shades of beige and a single dome light. No character, no mood—just a box that moves you from A to B. Long night drives feel draining, and the space never reflects you.

The Discovery: Light That Hears Your Music

The Symphony Kit changes everything. Miniature acrylic tubes packed with addressable LEDs, a smart control hub, and a remote—all modular so you design the layout. Twin control via a free app and IR remote. Suddenly your car responds to every beat.

The After: A Cockpit That Moves to Your Mood

Soft pastels for early mornings, pulsing neons for weekend night drives, a full‑colour spectrum that breathes with your playlist. Passengers ask where you got it. The car you always had now feels like a member of the premium club, and it took less time to install than a coffee break.

Why This, Not That