Bluetooth AUX Adapter for Car with Hands-Free Calling
Your car stereo still works, so keep it. This small AUX adapter adds Bluetooth 5.3 music and a built-in microphone for hands-free calls, using the input your dash already has. Plug it in, pair once and every drive starts without a cable.
Read the full descriptionDescription
Your car stereo still works, so keep it. This small AUX adapter adds Bluetooth 5.3 music and a built-in microphone for hands-free calls, using the input your dash already has. Plug it in, pair once and every drive starts without a cable.
Turn any car's AUX port into a Bluetooth 5.3 receiver and hands-free calling device in one plug-and-play unit
- No Bluetooth in older car stereo
- Wired-only audio setup
- Need for hands-free calls while driving
- Audio dropouts or unstable connection
Give your older car wireless music and calls, in one plug
Your AUX-only stereo stops you from streaming and taking calls without a cable. Plug this in and pair once, and every drive becomes hands-free.
Everything your AUX port was missing

Bluetooth in the AUX port you have
The 3.5mm jack in your dash does the work. The plug is knurled metal and seats firmly, and the body stays small enough to sit clear of the gear shift. Setup is plug in, slide to RX, and pair.

Calls answered with one button
The built-in microphone sits on a clip-on body, and the rear clip holds it near your collar. The round button answers and ends a call, so your hands stay on the wheel and the phone stays in the cup holder.

Stable connection, every drive
Bluetooth 5.3 with a smart chip is built for steady output and low power use, as listed on the packaging. The three blue LEDs show the link state at a glance, so you know it is live before you pull out.
The numbers that matter
- 5.3Bluetooth version
- 3.5mmAUX plug connector
- 3blue LED indicators
Plug in, pair once, and drive
- 1Plug into the AUX port
Push the knurled 3.5mm plug straight into the AUX jack until it sits flush and firm.
- 2Slide the switch to RX
Set the TX/RX slide switch to RX so the unit receives audio from your phone and sends it to the car speakers.
- 3Hold the button to pair
Press and hold the round control button until the blue LEDs signal pairing mode, then select the adapter on your phone.
- 4Answer your first call
Press the round button once to answer and again to end. Keep the clip-on mic close to your collar for the clearest audio.
Your car still has plenty of drives left
The cable is the problem
Most older stereos have a 3.5mm AUX jack and nothing else. So every drive starts with a cable running from the phone to the dash, and every call means reaching across for the handset before the light turns green.
One plug, no replacement
The car you already own does not need a new head unit. One small plug fits the AUX port you already use and turns that wired input into a Bluetooth receiver. No wiring, no tools, no installer appointment.
Calls without the fumble
Pair once and the rest of the drive takes care of itself. Music streams from your phone, and one press of the round button answers or ends a call. The built-in mic sits close to your collar, so you never have to lift the phone.
Cheaper than a new stereo, cleaner than FM
| This adapter | FM transmitter | New head unit | |
|---|---|---|---|
| Works with an existing AUX port | — | — | |
| Professional installation needed | — | — | |
| Static-free signal in traffic | — | ||
| Built-in mic for hands-free calls | Partial |
Characteristics
Reviews
Questions and answers
If the stereo has a working 3.5mm AUX input, the adapter plugs straight into it. Check that the jack is clear of dust and that the input is not used by a cable you still need. Older stereos with a standard AUX jack are the main use case.
The mic sits in a clip-on body close to your collar, which keeps it near your voice instead of across the cabin. We do not publish a noise figure for highway driving, so run one longer call on your first trip to hear how it sounds with your windows and fan set.
Yes. Slide the TX/RX switch to TX, pair your headphones or speaker, and the unit sends audio out from a wired source. Switch back to RX when you want the car stereo to play from your phone.
An FM transmitter broadcasts on a radio frequency, so it picks up static and interference in traffic. This adapter sends a Bluetooth link into a wired AUX input, which keeps the signal steady and gives you a built-in mic for calls that an FM unit does not offer.
A new head unit with professional installation costs far more than this adapter and usually means new wiring and a trim panel. This plug costs a fraction of that and moves with you if you change cars, so the money goes into a feature you use every day instead of a replacement stereo.
No installation is needed. The adapter plugs into the AUX port, sits in the console or clips to clothing, and runs on the connection you already have. Pair it with your phone once and it reconnects on later drives.
Similar products
See all






