Battery-Powered BBQ Charcoal Fan for Faster Fire Starting

A Nozzle That Points Air Where It Matters

• Aim the Air Exactly Where It Counts

  The polished stainless steel nozzle narrows the airflow into one focused jet. Point it at the base of the charcoal pile, where ignition starts, and the coals catch from the bottom up instead of glowing only on top.

• Trigger Control, No Lungs Required

  The pistol-style rear handle sits in your hand like a tool, not a bellows. Your finger rests on the trigger, so the airflow stays steady while your other hand positions the nozzle. No leaning over the kettle and no puffed cheeks.

Light Charcoal in Three Simple Steps

1. 1
   Build the pile and aim low

   Stack the charcoal in a pile and set the nozzle at the base, where the first coals need air to catch.

2. 2
   Switch on and press the trigger

   Turn the fan on with the switch on top, then hold the pistol grip at arm's length and press the trigger for a steady jet into the coals.

3. 3
   Close the lid once coals glow

   When the coals glow orange, turn the fan off and close the lid so the fire settles and spreads through the pile.

Simple Care Between Cookouts

• Clear the nozzle

  Knock out ash after each use so the airflow stays strong at the tip.

• Pull the batteries

  Take the four AA cells out between cookouts so they do not drain or corrode in the housing.

• Keep the body back

  Let only the nozzle reach the coals, since the plastic housing warms up near intense heat.