Automatic Float Valve Livestock Water Bowl for Cattle
Fill the trough once, then stop hauling. This wall-mounted livestock bowl runs from your water line and holds its level with a float valve, so cattle, horses, goats, and sheep drink from a full bowl. Mount the plate on solid framing and the daily chore list gets shorter.
Read the full descriptionDescription
Fill the trough once, then stop hauling. This wall-mounted livestock bowl runs from your water line and holds its level with a float valve, so cattle, horses, goats, and sheep drink from a full bowl. Mount the plate on solid framing and the daily chore list gets shorter.
Automatic float-valve water bowl for livestock that keeps fresh water topped up
- manually refilling animal water daily
- water running out in pens or stalls
- spilled or contaminated water from open troughs
Fresh water that refills itself, so you don't have to
Stop hauling buckets and checking dry troughs every few hours. This wall-mounted bowl holds its level from your water line, so animals drink from a full bowl.
A valve that keeps the water level steady
- A float valve that holds the level
The float valve closes the inflow as the bowl fills, so the water stays at the level you set. You stop refilling by hand, and as long as the float closes properly the bowl will not spill onto the pen floor.
- Built for daily livestock use
The underside has ribbed reinforcement, and the black metal mounting plate has screw holes for fixing it to a wall. That structure carries the weight of a full bowl and the bumps from animals that brush against it every day.
- Fed straight from your water line
The threaded side inlet takes your water line fitting, so the bowl runs from the supply you already have. No bucket run, no hauling water to the trough each morning.
Mount it on the wall and connect the line
- 1Fix the mounting plate
Hold the black metal plate at animal height and drive screws through the holes into solid wall framing.
- 2Thread the inlet to the line
Connect the threaded side inlet to your water line fitting and tighten the joint.
- 3Open the supply
Turn the water on and let the bowl fill until the float valve closes the inflow at its level.
- 4Check the drain plug
Make sure the plug on the bottom of the basin is closed before you leave animals on the bowl.
- 5Recheck after a few days
Look over the mount and the inlet connection during the first week of use.
What comes with your order
- Livestock water bowl×1
Forest green plastic basin with black metal mounting plate and ribbed underside
- Float valve×1
White float valve with threaded side inlet
Every bucket run, one valve at a time
The daily bucket run
Twice a day the same loop repeats: fill the bucket at the tap, carry it across the yard, and pour it into a trough that was half empty by the time you got there. In a heat wave or a cold snap the loop gets longer and heavier. The water is not the hard part. The walking back and forth is.
The trough that ran dry
A pen looks fine at breakfast. By afternoon the level has dropped, dust and debris have settled on the surface, and the animals have been standing at an empty trough. Open troughs collect whatever blows in, and a missed check costs more than the bucket run ever did.
A bowl that stays full
The bowl mounts on a sturdy wall at animal height and threads onto your water line. When the water reaches the set level, the float valve shuts the inflow off. Animals drink from a full bowl, and your checks turn into a quick look instead of a bucket run.
Float valve versus hand-filled troughs
| This bowl | Open bucket | Basic trough | |
|---|---|---|---|
| Refills from a water line | — | — | |
| Automatic float shut-off | — | — | |
| Mounts on a wall at animal height | — | — | |
| Drain plug on the basin | — | — |
Characteristics
Reviews
Questions and answers
Yes. The bowl is fed through its threaded side inlet, so it works best where a water line runs to the wall at animal height. Without a line you are back to filling it by hand.
The basin has a ribbed underside for reinforcement, and the black metal mounting plate carries the bowl on the wall. Animals will knock it, so mount it into solid framing and check the fixings after the first few days.
Cattle, horses, goats, and sheep all drink from it. Set the height for the animals in your pen and keep the bowl out of reach of hooves where you can.
Screw the metal plate into solid wall framing, then thread the side inlet onto your water line. Open the supply and confirm the float shuts off at the set level.
The float valve is the reason to buy it. A basic trough costs less up front, but every day of hand filling is labor you pay for in time. This bowl is built from premium materials with a metal mount and a threaded inlet, so the saving repeats every day it runs on your line.