$33.90
Free delivery · 7–14 days
LED Festoon Dome Light Bulbs – 12‑Chip COB Crystal White, 4Audi Door LED Logo Projector Lights — Ghost Shadow Courtesy
About this itemAll characteristics
Typeautomotive lighting accessories
Housing materialFrosted polycarbonate with precision‑molded lens ring
LensMulti‑element optical glass
LED typeHigh‑output, 6000K cool white
Projection patternAudi four‑ring ghost shadow logo
Package contents2× LED projector units, 2× wiring harnesses with red/black leads
From the seller
Transform every entrance into a signature moment with the Audi ghost shadow door lights. The crisp four‑ring projection turns a standard puddle lamp into a quiet statement of luxury.
Read the full descriptionDescription
Transform every entrance into a signature moment with the Audi ghost shadow door lights. The crisp four‑ring projection turns a standard puddle lamp into a quiet statement of luxury.
Project iconic Audi logo onto ground with elegant ghost shadow lighting
Solves
- dim entry areas in luxury vehicles
- lack of premium ambient lighting
- generic courtesy lights without brand identity
Project Iconic Audi Style with Every Door Open
Elevate every entrance and exit with the unmistakable Audi logo projected beneath your doors — a quiet signal of refinement.
What Makes This Light Different
Crystal‑Sharp Projection
A multi‑element glass lens focuses the LED beam so the four rings appear razor‑sharp on asphalt, concrete, or gravel. No blur, no hot spots — just a clean, professional light signature.
Installs in Five Minutes
No cutting, no splicing, no trip to the dealership. Remove the factory lamp, click the harness into the existing plug, and snap the projector into place. The connectors are keyed so they only fit one way.
Perfect Balance Front to Back
Two projectors arrive in the box, one for each side. That means the passenger sees the same elegant welcome as the driver — a coordinated detail that elevates the entire vehicle.
The Hard Facts
- 2Projector units included in package
- 12VStandard automotive DC power
- 6000KCool white LED output
Install in 3 Minutes
- 1Pry out the old lamp
Insert a small flathead screwdriver under the edge of the existing courtesy light and gently lever it out. Release the wiring clip by pressing the tab.
- 2Connect the new harness
Take the included red/black harness and click it onto the factory connector inside the door. It is keyed and will only fit one way.
- 3Snap in the projector
Attach the harness lead to the projector unit, then press the unit firmly into the door panel until it sits flush. Repeat on the other side.
- 4Test and enjoy
Open the door to trigger the lamp. The crisp Audi rings should appear instantly. Close the door and admire the factory‑clean fit.
Everything You Get
- LED projector light units×2
Pre‑assembled with frosted housing and glass lens
- Wiring harnesses with connectors×2
Red and black wires, keyed two‑pin plug
From Dim Entry to a Statement of Arrival
The Invisible Upgrade
Standard courtesy lights are functional but forgettable. They cast a weak pool of light and do nothing to reflect the vehicle you chose. You step out into the dark, and the moment passes in anonymity.
A Precision Solution
Engineered specifically for Audi door lamps, the LED ghost shadow projector snaps into place with zero wiring modifications. The precision‑cut lens and high‑output LED create a crisp, luminous four‑ring emblem that glides across the pavement the instant the door opens.
The Everyday Reveal
Night after night, the ritual is the same: you unlock the car, and the ground responds with your personal signature. It is a small thing that never gets old — and somehow makes every drive feel like an occasion.
Keep Your Lights Like New
- Wipe clean
Use a damp microfiber cloth on the lens if mud or dirt accumulates. Dry with a soft cloth.
- Avoid abrasives
No polish, wax, or chemical cleaners on the lens — they can cloud the optical surface.
- Check after car washes
Automatic washes won’t dislodge the projector, but run your finger around the edge to ensure it is still flush.
- Inspect wiring
If you ever remove the door panel, double‑check the harness clip is fully seated before reassembly.
Not Much Bigger than a Coin
- 2.8 cmDiameter
- 1.6 cmDepth
- 15 cmHarness length
Roughly the size of a standard door lamp — no extra drilling or trimming needed.
Why This, Not That
| Ghost Shadow | Generic Lamp | |
|---|---|---|
| Brand logo projection | — | |
| Installation effort | Plug & play, 5 min | May need wiring |
| Build quality | Precision optics, glass lens | Basic plastic bulb |
| Light output | Sharp, focused logo | Dim flood |
| Set completeness | 2‑piece symmetry | Sold individually |
| Long‑term value | One‑time install, years of use | Frequent bulb changes |
Characteristics
Main
Categoryautomotive lighting accessories
Details
Housing materialFrosted polycarbonate with precision‑molded lens ring
LensMulti‑element optical glass
LED typeHigh‑output, 6000K cool white
Projection patternAudi four‑ring ghost shadow logo
Package contents2× LED projector units, 2× wiring harnesses with red/black leads
CompatibilityAudi models with standard round door lamps (A3, A4, A5, Q3, Q5, Q7, 2005+)
InstallationTool‑free plug‑and‑play; flathead screwdriver may be helpful for removal
Operating voltage12V DC (standard automotive)
Reviews
Questions and answers
Will these fit my Audi?
w
Wanelo · seller
They are designed to replace the factory door lamp and use the existing connector. If your Audi has a standard round courtesy lamp in the lower door panel, these will fit. Works with A3, A4, A5, Q3, Q5, Q7, and most models from 2005 onward. If you are unsure, pop out your current lamp and compare the plug — it is the same two‑pin connector.
Is the installation really that simple?
w
Wanelo · seller
Yes. You will need a small flathead screwdriver to gently pry out the old lamp, then unclip it. The new harness clicks into the factory plug, and the projector snaps back into the door. No wiring, no coding, no error lights. The whole process per door takes about two minutes once you have done the first one.
How bright is the projection?
w
Wanelo · seller
The high‑output LED is bright enough to see clearly on asphalt, concrete, or gravel, even under streetlights. It is not a floodlight — it is a crisp, focused logo. In complete darkness it can be seen from 20 feet away.
Are they weatherproof?
w
Wanelo · seller
The sealed polycarbonate housing and gasketed lens are built for daily driving. They hold up to rain, snow, and automatic car washes without fogging or shorting. The metal contacts are silver‑plated to resist corrosion.
Why two in a set?
w
Wanelo · seller
Because symmetry matters. A single projector looks like a repair; a matching pair looks like a design. The passenger should experience the same premium welcome as the driver.
What is the value compared to dealer options?
w
Wanelo · seller
Audi charges significantly more for a factory puddle lamp kit and often requires a dealership visit for coding. This set gives you the same visual impact for a fraction of the cost, in five minutes, with no recurring costs — you install once and enjoy the effect every time you open a door for years.
Similar products
See all
$35.90
Free delivery · 7–14 days
Wireless Car Projector Light — Custom Welcome Logos
$49.90
Free delivery · 7–14 days
Car Door Warning Light 120cm - Anti-Collision Strobe Safety
$34.90
Free delivery · 7–14 days
Touch Sensor Car LED Reading Lamp — 7 Color Modes, USB
$69.90
Free delivery · 7–14 days
Mini Bluetooth Speaker with LED Lights — Portable Stereo Sound
Audi Door LED Logo Projector Lights — Ghost Shadow Courtesy
$38.90