Aluminum Loading Ramp 78 in, 880 lb Portable Pair
Load the mower or ATV alone, without hauling a heavy steel ramp. This 2-piece aluminum set is 78 in long, rated 880 lb per pair, with a grippy perforated tread.
Read the full descriptionDescription
Load the mower or ATV alone, without hauling a heavy steel ramp. This 2-piece aluminum set is 78 in long, rated 880 lb per pair, with a grippy perforated tread.
Lightweight yet sturdy aluminum loading ramp with a non-slip perforated surface, sold as a portable 2-piece set
- heavy steel ramps are hard to lift and carry
- slippery surfaces when loading wheels or feet
- difficulty reaching a raised truck bed or trailer height
Load it alone, without the steel-ramp struggle
Heavy steel ramps are a hassle to lift, carry, and set up. This lightweight aluminum 2-piece set gives you a grippy 78-inch ramp rated 880 lb per pair.
Built to grip, built to hold
Grip that holds wheels
The perforated surface with raised dimples gives wheels and boots traction on the incline, so you are not guessing on the way up.
Rated to 880 lb a pair
A welded box-section underside adds rigidity to the aluminum body. The bolt-in hardware locks the ramp to your bed or platform.
A low, tapered lip
The tapered end gives a smooth drive-on and finished edges, and the set splits into two pieces you can carry and store easily.
The figures that matter
- 880 lbper pair
- 78 inramp length
- 8.5 inwidth per ramp
- 2 pcsin the set
Two pieces, hardware included
- Aluminum loading ramp×2
78 in x 8.5 in each
- Bolt-in mounting hardware
Threaded bolts for securing to bed or platform
From wrestling to rolling
The steel ramp problem
You are about to load the mower and the steel ramp is too heavy to haul out of the bed. You drag it, you strain, and then the wheels slip on the way up. The job takes twice as long as it should.
A lighter way to load
Two aluminum ramps you can carry one at a time. The perforated, dimpled tread grips, the tapered lip makes the entry easy, and the welded underside keeps it rigid. Loading becomes a one-person job.
Characteristics
Reviews
Questions and answers
The rating is 880 lb for the pair. Check your machine's loaded weight, including fuel and cargo, and stay under that number.
The ramp has threaded bolts and countersunk holes for mounting. Measure your bed or trailer edge first, and expect to adjust holes slightly on some setups.
The welded box-section underside is there to stiffen the ramp. Keep loads within the 880 lb pair rating and both pieces supported.
The perforated, dimpled surface gives traction, but wet or muddy ramps need care. Wipe off mud first and load slowly.
If you load alone, yes. Aluminum is far easier to lift and carry, which saves your back every time you load.
Similar products
See all
Aluminum Loading Ramp 78 in, 880 lb Portable Pair