Adjustable Height PC Tower Stand with Locking Wheels

Height, shelf, and wheels in one stand

• Height you set with two knobs

  Side knobs raise or lower the stand so the tower sits at the height your desk and cable run need. No tools, no guesswork.

• Locked in place when it counts

  The casters lock so the stand stays put during use and rolls only when you unlock it. The double-layer shelf is deep enough for an ATX chassis.

• Power you can reach

  Outlets and USB ports on the front panel put charging and peripherals within arm's reach. A side hook keeps the cords tidy.

From floor to desk height in minutes

1. 1
   Set the height

   Loosen the side knobs, raise or lower the stand to suit your desk and cables, then tighten.

2. 2
   Seat the chassis

   Center the tower on the shelf and check that it sits flat.

3. 3
   Route and lock

   Run cords through the side hook, plug into the front panel, then lock the casters.

Everything the stand needs

• Double-layer steel stand with carbon-fiber top×1

  Matte black powder-coated frame

• Locking caster wheels

  Lock for use, unlock to roll

• Side adjustment knobs

  Set the stand height

• Front power strip with USB ports×1

  Built into the front panel

• Side cable hook×1

  Keeps cords tidy

From tower on the floor to a rig that rolls

The tower that takes over

It sits on the floor collecting dust, or it squats on the desk where the keyboard should be. Either way, your tower is taking space you wanted for something else.

The reach that gets old

Every outlet hunt behind the desk and every cleaning job that starts with unplugging half your setup adds up. It is a small tax you pay again and again.

A stand that moves with you

A steel frame holds the chassis at the height you set. Power and USB sit on the front panel, and the casters lock when you want it still and release when you want it gone.

Simple upkeep for a matte finish

• Wipe the top

  Use a soft dry or barely damp cloth on the carbon-fiber surface.

• Dust the frame

  Wipe the steel frame to keep the matte coat clean.

• Unlock to move

  Release the casters before rolling the tower.

• Lock when parked

  Re-lock every caster once it is in place.

Fixed stands versus a movable rig stand