433.92MHz Metal 4-Button Gate & Garage Remote Replacement

Solid metal that lives on your keyring

• Brushed steel that lasts on your keyring

  The front plate is brushed stainless steel with a black rubber grip overmold on the back. Keys rub against it all day, and the metal shrugs off the scuffs that wear down a plastic shell in a few months.

• Four labeled buttons, no guessing

  Buttons are marked A, B, C and D in a single row, so you can tell which one opens the gate and which one runs the garage. A small indicator LED near the top edge confirms each press. Label the spare for tenants or family members and nobody has to test buttons at the curb.

• Swivel clasp that stays put

  The polished steel lobster clasp turns freely, so the remote does not twist or tangle with your house keys. It clips on and off without tools, which makes it easy to move between your key ring and the glovebox.

Pair it in a few simple steps

1. 1
   Confirm the system

   Check the label or manual on your gate or garage opener for 433.92MHz fixed code. If it reads rolling code, this spare will not work with that receiver.

2. 2
   Enter learn mode

   Put the opener into its learn or programming mode using the steps printed in its manual. The indicator on the receiver usually confirms it is ready.

3. 3
   Press the button you want to pair

   Press one of the A, B, C or D buttons on the spare. When the receiver responds, the button is paired. Repeat for any other button you plan to use.

4. 4
   Test at the gate

   Stand at the gate or garage and press each paired button once. A spare that was never tested is the one that fails on the morning you need it.

The gate stays shut until you find a remote

The gate that won't open

The only remote is in a coat pocket at home, or it went missing somewhere on the drive. The gate is closed, the car is idling outside, and the keypad code is the only way in. Every morning without a spare means a call to the installer and a wait of days.

A spare that matches your system

This transmitter is built for CAME 433.92MHz fixed-code gate and garage systems. The brushed stainless face feels solid in the hand and the metal does not flex on the keyring like a thin plastic clone does. Check your opener's label first, then pair it using the same learn steps you used for the original.

Back on the driveway

Pull up to the gate, press the button you already know, and the gate opens the way it always did. The spare sits on your keys next to the house key, so the next lockout is a short walk to the car instead of a long wait.

From lockout to back on the driveway

1. First use
   Confirm the frequency and match

   Check that your gate or garage runs 433.92MHz fixed code, then pair the spare using your opener's own steps.

2. 1 week
   Spare on your keyring

   Carry it daily with your keys. Press it once every few days to confirm the gate or garage still responds.

3. 30 days
   A backup you can trust

   Keep the spare on your keyring so a lost main remote no longer leaves you stuck at the gate.

Why a metal spare beats a cheap clone