$46.90
Free delivery · 7–14 days
Floating Monopod Hand Grip for GoPro and Action Cameras360 Rotating Bike Handlebar Mount for GoPro & SJCAM
New
1 / 6From the seller
Point your action camera exactly where the ride is going. This handlebar clamp carries a GoPro-style stud head that turns a full 360 degrees, so you re-aim mid-ride without a new mount. It fits GoPro and SJCAM cameras on bikes and motorcycle bars.
Read the full descriptionDescription
Point your action camera exactly where the ride is going. This handlebar clamp carries a GoPro-style stud head that turns a full 360 degrees, so you re-aim mid-ride without a new mount. It fits GoPro and SJCAM cameras on bikes and motorcycle bars.
Rotate your action camera 360 degrees on any bike or motorcycle handlebar
Solves
- camera angle stuck on bike handlebars
- need to adjust camera view while riding
- compatibility with GoPro and SJCAM mounts
Point your camera exactly where the ride is going
Stop filming your stem and the sky. Clamp it to any bike or motorcycle bar, rotate it 360 degrees, and capture the view you actually rode.
Built for the moment you need a new angle
Rotate the head 360 degrees
The stud head turns a full circle, so one clamp covers the trail ahead, the road behind you and the sky when you want a wide shot. Loosen the knob, turn, retighten. The whole adjustment takes a few seconds and you never take the mount off the bar.
Grip the bar with rubber lining
The jaws are lined with rubber, which bites into the bar without relying on the plastic alone. The thumb knob sets the hold by hand, no tools needed. Tighten until the mount stops moving, and the lining does most of the gripping.
Fits GoPro and SJCAM studs
The head uses a GoPro-style stud, the same interface GoPro and SJCAM cameras mount to. If your camera or adapter already uses that stud, it seats on this head and you skip buying a second rig.
Clamp it on in under a minute
- 1Open the clamp
Loosen the thumb knob until the jaws open wide enough to slide over the bar.
- 2Seat it on a clear section of bar
Place the clamp away from the stem and brake cables so it does not block controls or the frame.
- 3Tighten the knob by hand
Turn until the mount stops moving on the bar. Stop there, since the rubber lining does most of the gripping.
- 4Mount the camera and aim
Screw your camera onto the stud head, loosen the knob, rotate to the angle you want, then retighten.
The footage was never the problem, the angle was
The angle was wrong again
You get home, drop the card into the laptop, and find ten minutes of handlebar and sky. The trail was in the frame for maybe two seconds. Stopping to fix the camera mid-ride means breaking the flow, so most riders just keep pedaling and hope for the best.
Turn it, aim it, keep riding
This clamp puts the rotation where you can reach it. Loosen the thumb knob, turn the stud head through a full 360 degrees, and tighten again. The rubber-lined jaws hold the bar while you work, so the mount stays put once you roll.
Film the ride you actually took
The next time you clip in, the camera points where your eyes go. The footage matches what you saw from the saddle, and the clip you post is the descent you remember.
Characteristics
Details
TypeAction camera accessories
CategoryElectronics
Best forUnisex
Reviews
Questions and answers
Will it fit my bike or motorcycle handlebar diameter?
w
Wanelo · seller
The listing does not publish a bar diameter, so measure your bar before you order. The rubber-lined jaws grip the bar and the thumb knob sets the hold. Thicker grips may need an extra turn of the knob before you ride.
Is it compatible with my GoPro or SJCAM model?
w
Wanelo · seller
The head uses a GoPro-style stud, the same mounting interface used by GoPro and SJCAM cameras. If your camera or adapter takes that stud, it seats on this head.
Will the clamp slip on rough trails?
w
Wanelo · seller
The rubber lining keeps the clamp on the bar, and the thumb knob sets the tension. Check the knob after the first few minutes of riding and retighten if the mount moved. Over-tightening a plastic clamp can crack it, so stop once the mount stops moving.
Can I use it on a motorcycle as well as a bicycle?
w
Wanelo · seller
Yes. The clamp goes on any bike or motorcycle handlebar, so one mount moves between a bike and a bar. Keep it clear of brake cables and controls on either one.
Does it work with a GoPro mount adapter I already own?
w
Wanelo · seller
If your adapter uses the GoPro-style stud, it fits this head. You keep the camera and adapter you already own and add one budget clamp, which costs far less than a second camera mount kit for a second bike.
Similar products
See all
$46.90
Free delivery · 7–14 days
Waterproof Floating Hand Grip for GoPro-Style Cameras
$46.90
Free delivery · 7–14 days
Waterproof Bike Bluetooth Speaker with Handlebar Clamp
$54.90
Free delivery · 7–14 days
Full Face Helmet Chin Mount for GoPro POV Riding
360 Rotating Bike Handlebar Mount for GoPro & SJCAM
$48.90