360 Degree Flexible Lawn Sprinkler Head for Even Watering
Set one flexible head in the lawn and let a full 360-degree circle of fine spray do the work. The three-piece set stakes into soil, connects to a standard garden hose and waters grass and beds in one pass, so your evenings are yours again.
Read the full descriptionDescription
Set one flexible head in the lawn and let a full 360-degree circle of fine spray do the work. The three-piece set stakes into soil, connects to a standard garden hose and waters grass and beds in one pass, so your evenings are yours again.
Covers a wide lawn area with 360-degree flexible spray arms
- uneven watering of lawns
- manually moving the hose around the garden
- hard-to-reach garden areas
Cover the whole lawn without dragging the hose around.
Instead of moving the hose by hand and missing dry patches, set one flexible head in the lawn and let 360 degrees of fine spray reach the grass evenly.
One head, a full circle of spray
- 360-degree flexible arms
Multiple flexible arms spin around one base, so a single placement waters a wide circle of grass. Stake the head once and the spray covers the lawn in one pass, instead of walking the hose from corner to corner.
- Three-hole nozzle tips
Each arm ends in a three-hole nozzle that breaks the water into fine streams. The spread stays even across the grass, so no single patch gets soaked while the edges stay dry.
- Stake it, connect it, go
The ground spike anchors the head in the lawn and the quick-connect adapter fits a standard garden hose. Nothing else is needed to start watering.
Set it up in three steps
- 1Connect the adapter
Thread the quick-connect adapter onto the garden hose by hand, then click the sprinkler base onto it.
- 2Stake it into the lawn
Water the spot briefly to soften the soil, then push the ground spike straight down so the head stands firm.
- 3Set the dial and run
Turn the dial to adjust the spray until it reaches the edges of the area you want covered, then turn on the water.
- 4Move it to a new spot
After each session, shift the head to a new position so the whole lawn gets covered.
Everything you need to start watering
- Sprinkler head×1
Flexible spray arms with three-hole nozzle tips and a dial on the base
- Ground spike stake×1
Pushes into the lawn to hold the head steady
- Hose quick-connect adapter×1
Screws onto a standard garden hose
Characteristics
Reviews
Questions and answers
It fits a standard garden hose. The included quick-connect adapter screws onto the hose end, then the sprinkler base clicks onto the adapter without tools.
One head throws a full 360-degree circle, so a single placement reaches a wide patch of grass. It suits small to medium lawns best. On a large corner lot, add a second head to reach the far edge.
This is a budget build in matte plastic, so handle it with some care. Water the spot before pushing the stake into hard ground, and do not force the fittings. Moving the head to a new spot after each session spreads the wear across the lawn.
Yes. Set the head near the bed, aim the arms at the plants and turn the dial for a gentler spray. Check that the arcs reach the edges of the bed.
Dragging a hose costs you time every evening, and a basic stake sprinkler covers only a narrow fixed pattern. This set covers a full circle from one spot and comes with everything you need to start, so the value shows up in evenings you get back.
Similar products
See all