25-in-1 Precision Screwdriver Set with Leather Pouch

Every bit has a home

• Every size, labelled

  Each bit sits in its own marked slot, so the correct Torx, Phillips or pentalobe is found on the first try. A missing bit shows up as an empty slot before you start the job, not halfway through a screw.

• Phone and laptop ready

  The set includes Torx T2 to T15 and pentalobe bits, which cover the fasteners common in phones and laptops. Add the Phillips and flathead bits and you have the mixed screw types found in glasses and small household devices.

• A handle that turns small screws

  The copper-toned aluminium handle has grip rings and a gold-capped end. It sits comfortably in the palm for slow, precise turns, which matters when a screw head is only a few millimetres across.

Everything you need in one pouch

• Screwdriver handle×1

  Copper-toned aluminium with grip rings and a gold-capped end

• Screwdriver bits×25

  Chrome steel: Torx T2 to T15, Phillips, flathead, triangle and pentalobe

• Storage pouch×1

  Black lychee-grain leather-look with snap closure

A missing bit stalls the whole repair

The bit that went missing

You reach for the T3 and it is not there. It is under a pile of cables, or it rolled off the desk while the phone sat open. The repair stops, the client waits, and you spend ten minutes digging through a drawer that was supposed to be organised.

One pouch, every bit

This 25-piece set puts every size in its own marked slot. Torx T2 to T15, Phillips, flathead, triangle and pentalobe bits sit where your hand expects them, so the right one comes out on the first try. Nothing goes missing between jobs because nothing leaves the pouch.

Repairs that flow

The copper aluminium handle has grip rings for control on tiny screws, and the bits stay sorted in the snap-closed pouch. Work moves from search-and-swap to a grab-and-go routine, whether you are at the bench or on a client's floor.

Care for bits and pouch

• Return each bit to its slot

  After every job the set stays complete and nothing rolls off the bench.

• Match the bit before you press

  Test-fit the bit to the screw head first. A mismatch slips and rounds the head.

• Use light, steady pressure

  Turn slowly on small fasteners and stop if the bit starts to slip.

• Wipe the handle and pouch

  Dry the copper handle and leather-look pouch after use to keep them clean.

One kit beats a drawer of loose bits